HP StorageWorks 8/20q Reference Guide

HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network Management Protocol Reference Guide 105
Status
Mandatory
Return value
The type of remote device in the link table. For example: switch (4).
connUnitLinkConnIdY (1.3.6.1.3.94.1.12.1.13
This is the Fibre Channel ID of this port. If the connectivity unit is a switch, this is expected to be a Big
Endian value of 24-bits. If this is loop, then it is the AL_PA that is connected. If this is an E_Port, then it only
contains the domain ID. If not any of those, is unknown, or is or cascaded loop, returns all bits set to 1.
Syntax
OCTET STRING (SIZE(3))
Access
Read-only
Status
Mandatory
Return value
The remote Fibre Channel address of each entry in the link table
connUnitLinkCurrIndex (1.3.6.1.3.94.1.12.1.14)
The last-used link index
Syntax
INTEGER
Access
Read-only
Status
Mandatory
Return value
The last-used link table index number
Zone table
The objects described in this section are in a table format indexed zone number and Index. The zones are
numbered 1 to connUnitZoneSetNumZones, the index represents the members within the zones.
An example of how to access one of these objects:
fcmgmt.connSet.connUnitZoneTable.connUnitZoneEntry.connUnitZoneIndex.1.1
connUnitZoneIndex (1.3.6.1.3.94.1.13.1.1)
The unique table index for each zone. Valid values are between 1 and connUnit-ZoneSetNumZones.
Syntax
INTEGER (1..2147483647)
Access
Read-only
Status
Mandatory

HP StorageWorks 8/20q Specifications

General

Brand	HP
Model	StorageWorks 8/20q
Category	Switch
Language	English