HP StorageWorks 8/20q

HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network Management Protocol Reference Guide 71
Return value
The WWN of the switch followed by 8 bytes of zeros. For example: 10 00 00 C0 DD 00 71 C9
00 00 00 00 00 00 00 00.
connUnitGlobalId (1.3.6.1.3.94.1.6.1.2)
An optional global-scope identifier for this connectivity unit. It must be a WWN for this connectivity unit or
16 o c t et s o f va l u e ze ro (0).
Syntax
connUnitGlobalId
Access
Read-only
Status
Mandatory
Return value
The WWN of the switch followed by 8 bytes of zeros. For example: 10 00 00 C0 DD 00 71 C9
00 00 00 00 00 00 00 00.
connUnitType (1.3.6.1.3.94.1.6.1.3)
The type of this connectivity unit.
Syntax
FcUnitType
Access
Read-only
Status
Mandatory
Return value
The value is switch (4).
connUnitNumports (1.3.6.1.3.94.1.6.1.4)
Number of physical ports in the connectivity unit (internal/embedded, external).
Syntax
INTEGER
Access
Read-only
Status
Mandatory
Return value
The number of ports on the switch.
connUnitState (1.3.6.1.3.94.1.6.1.5)
The operational state of the switch mapped. The overall state of the connectivity unit.
Syntax
INTEGER