HP StorageWorks 8/20q Reference Guide

HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network Management Protocol Reference Guide 73
Syntax
DisplayString (SIZE (0..79))
Access
Read-only
Status
Mandatory
Return value
Returns the SystemDescription of connected switches. The value for the 8/20q FC switch is HP
StorageWorks 8/20q Fibre Channel Switch. The value for the SN600 FC switch is either HP
StorageWorks SN6000 Stackable Dual Power Supply Fibre Channel Switch or HP
StorageWorks SN6000 Stackable Single Power Supply Fibre Channel Switch.
connUnitSn (1.3.6.1.3.94.1.6.1.8)
The serial number for this connectivity unit
Syntax
DisplayString (SIZE (0..79))
Access
Read-only
Status
Mandatory
Return value
The chassis serial number
connUnitUpTime (1.3.6.1.3.94.1.6.1.9)
The number of centiseconds since the last unit initialization
Syntax
TimeTicks
Access
Read-only
Status
Mandatory
Return value
The time interval since last POST (Power On Self Test) or a reset (not including hotreset command for the
NDCLA feature). A POST occurs during power-on or hardreset.
connUnitUrl (1.3.6.1.3.94.1.6.1.10)
The URL used to launch a management application, if applicable. Otherwise, it is an empty string. In a
standalone unit, this is the same as the top-level URL. This has the same definition as systemURL for
keywords. If write is not supported, the return value is invalid. This value is retained across boots.
Syntax
DisplayString
Access
Read-write
Status

HP StorageWorks 8/20q Specifications

General

Brand	HP
Model	StorageWorks 8/20q
Category	Switch
Language	English