Table 46 Error codes (part code 5205) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
EIf this problem persists, please contact
HP Technical Support.
An error occurred during SVP
processing.
89715205
WSpecify the other volumes.The specified volumes cannot be used
for migration, because the specified
source volume is a Continuous Access
Synchronous volume or a Continuous
Access Synchronous Z volume, and the
specified target volume is an external
volume.
550595205
WConfirm the settings of the specified
volumes.
The specified Auto LUN plan cannot be
executed because a volume on which
VMA of Data Retention is set is paired
with a volume on which VMA is not set.
550605205
WCheck the setting of the migration source
volume and the migration target volume.
If the migration source volume is a
normal volume, a CVS volume of the
same capacity as the migration source
volume cannot be specified as the
migration target volume. If the migration
source volume is a CVS volume, a
normal volume of the same capacity as
the migration source volume cannot be
specified as the migration target volume.
552015205
WSpecify the parameters other than
"None" in "Sampling Term."
The auto migration plans cannot be
created because "None" is specified in
"Sampling Term."
552075205
WSelect a volume that has the same owner
ID.
The owner ID of the disk subsystem used
by the user does not match the owner ID
of the specified target volume.
552235205
WSelect a volume that has the same owner
ID.
The owner ID of the disk subsystem used
by the user does not match the owner ID
of the specified reserve volume.
552245205
WThe specified plan cannot be released
with Remote Web Console.
The specified plan is the one created by
other than Remote Web Console.
552255205
WThe specified migration plan cannot be
stopped with Remote Web Console.
The specified plan is the one created by
other than Remote Web Console.
552265205
WSelect a volume that has the same owner
ID.
The specified volume is already reserved
with a different owner ID by Auto LUN.
552275205
WConfirm the setting of the specified
volume.
The volume(s) are already being used as
a data volume by Continuous Access
Journal or Continuous Access Journal Z.
552575205
WConfirm the setting of the specified
volume.
The volume(s) are already being used as
a data volume by Continuous Access
Journal or Continuous Access Journal Z.
552585205
WConfirm the setting of the specified
volume.
The volume(s) are already being used as
a data volume by Continuous Access
Journal or Continuous Access Journal Z.
552595205
WConfirm the setting of the specified
volume.
The volume(s) are already being used
by Compatible FlashCopy.
554315205
WConfirm the setting of the specified
volume.
The volume(s) are already being used
by Compatible FlashCopy.
554325205
124 Message (part code group 5nnn)
To Next Page
Loading...
Need help?
General