Table 50 Error codes (part code 6005) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
WSelect another volume.A volume cannot be used as an M-VOL
when:
• it is used by Continuous Access
Journal or Continuous Access Journal
Z.
• it is used by Business Copy Z or
Compatible FlashCopy.
87766005
WCheck the controller type of the specified
MCU and RCU, then contact HP
Technical Support.
Combination of MCU with RCU
controller type is not supported.
87776005
EThere is an invalid cache or shared
memory status on the RCU. Check the
status and recover the cache or shared
memory, then retry the operation.
One side of the Cache or shared
memory on the RCU is blocked.
87786005
WConfirm the controller type of the RCU.Continuous Access Synchronous is not
supported under the RCU controller type.
87796005
WInstall the Continuous Access
Synchronous Z in the MCU and the RCU.
Continuous Access Synchronous Z
function is not installed in the specified
controller.
87806005
WInstall the Continuous Access
Synchronous Z in the MCU and the RCU.
Continuous Access Synchronous Z
function is not installed in the specified
controller.
87816005
WCheck the volume again.The M-VOL is defined as the expansion
volume.
87856005
WCheck the volume again.The R-VOL is defined as the expansion
volume.
87866005
WCheck the Port, GID and LUN settings of
the RCU.
The specified expanded volume in the
RCU is not defined.
87886005
WThe combination of the specified volumes
for LUN Expansion is not valid. Verify
the parameters and retry the operation.
Combination of the specified expansion
volumes is not valid.
87896005
WConfirm the status of the specified
expansion volume and microcode
version of the RCU.
The specified expansion volume
(Port/GID/LUN) of the RCU is not
usable.
87906005
WVary the concerned path offline from the
other host, then retry the operation.
The specified M-VOL is still online from
another HOST.
87916005
WInstall the Volume Retention in the MCU
and the RCU, then retry the operation.
The operation failed because the Volume
Retention function was not installed in
the specified RCU.
Install Volume Retention, and retry the
operation.
87926005
WInstall Continuous Access Synchronous
in the MCU and the RCU, then retry the
operation.
The Continuous Access Synchronous
function is not installed in the specified
controller(s).
87936005
WInstall Continuous Access Synchronous
in the MCU and the RCU, then retry the
operation.
The Continuous Access Synchronous
function is not installed in the specified
controller(s).
87946005
Part code 6005 141