Table 50 Error codes (part code 6005) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
WCheck the status of the specified M-VOL
from the host or the SVP.
The operation failed because the
specified M-VOL applied to any of the
following:
• A T-VOL of Business Copy Z which is
not in the Split pair (PSUS) status.
• An S-VOL of Business Copy which is
not in the Split pair (PSUS) status.
• A reserved volume of Business Copy
Z or Business Copy.
• A volume used in Business Copy Z or
Business Copy in Reverse Copy
status.
• A T-VOL of Compatible FlashCopy.
• A FICON(R) Data Migration Source
Volume.
87956005
WCheck the status of the specified R-VOL
from the host or the SVP.
The operation failed because the
specified R-VOL applied to any of the
following:
• A T-VOL of Business Copy Z or
Compatible FlashCopy.
• An S-VOL of Business Copy.
• A reserved volume of Business Copy
Z or Business Copy.
• A volume of Business Copy Z or
Business Copy in Reverse Copy
status.
• A volume of FICON(R) Data
Migration.
87966005
WCheck the status of the specified M-VOL
from the host or the SVP.
If the M-VOL is a Business Copy
Z/Compatible FlashCopy T-VOL, one
S-VOL must be paired with one T-VOL.
If the M-VOL is a Business Copy S-VOL,
one P-VOL must be paired with one
S-VOL.
87976005
WConfirm the status of Business Copy
Z/Business Copy/Compatible FlashCopy
in MCU from the host or the SVP.
The MCU is already used for Business
Copy Z/Business Copy/Compatible
FlashCopy.
87986005
WVerify the status of the specified M-VOL.The M-VOL is already in use for Auto
LUN.
87996005
WVerify the status of the specified R-VOL.The R-VOL is already in use for Auto
LUN.
88006005
WVerify the status of the specified R-VOL.
If the device is not reserved, retry the
operation.
The R-VOL is reserved, or the RCU or the
path between MCU-RCU is in a heavy
load condition.
88016005
WThe add/resume pair operation failed,
because the either the specified volume
or another volume in the same group is
being changed to simplex or suspend
status. Retry the operation after the status
change is completed.
Please retry Add Pair(Paircreate)/Resume
Pair(Pairresync) operation in a few
minutes.
88086005
142 Message (part code group 6nnn)
To Next Page
Loading...
