Table 50 Error codes (part code 6005) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
WThe RCU runs on the 2DC configuration
in which the Continuous Access Journal
cooperates.
Set "Track" to the "Difference
Management," then retry the operation.
The specified R-VOL was a pair volume
of the Continuous Access Journal.
A pair could not be created because
"Cylinder" was set to the "Difference
Management."
688176005
WInstall the External Storage, then retry the
operation.
The operation failed, because the
External Storage function was not
installed.
688266005
W
• The serial number of the local DKC
cannot be set as the serial number of
the other DKC. Check the input serial
number of the other DKC.
• A quorum disk cannot be registered
in a same external storage device
with a different quorum disk ID.
Check whether a quorum disk is
registered in the selected external
storage device with a different
quorum disk ID.
• The serial number of the other DKC,
which is set from MCU (or RCU) when
registering a quorum disk, might be
different from the serial number of the
RCU (or MCU). Check the input serial
number of the other DKC, which is
set from MCU (or RCU) when
registering a quorum disk.
The operation failed, because there was
an error in the specified parameter.
688276005
WCheck the volume setting.The specified volume has already been
set to the quorum disk.
688296005
WCheck the volume setting.The specified volume is not a quorum
disk.
688306005
WRetry the operation after the completion
of discarding zero data on the specified
volume.
The operation failed, because the
specified M-VOL was a volume of Thin
Provisioning whose zero data was being
discarded.
688446005
WRetry the operation after the completion
of discarding zero data on the specified
volume.
The operation failed, because the
specified R-VOL was a volume of Thin
Provisioning whose zero data was being
discarded.
688456005
WWait until the initializing process is
completed, then retry the operation.
The operation failed, because the
specified M-VOL was being initialized
by Business Copy or Business Copy Z.
688466005
WWait until the initializing process is
completed, then retry the operation.
The operation failed, because the
specified R-VOL was being initialized by
Business Copy or Business Copy Z.
688476005
WCheck the volume setting.The operation failed, because the
specified volume was not a volume of
External Storage.
688726005
WSpecify another volume, or release the
LU path definition.
The operation failed, because the
specified volume was defined in the LU
path.
688736005
Part code 6005 155
To Next Page
Loading...
Need help?
General