Table 56 Error codes (part code 6610) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
WTo delete the journal volume, click [Yes].
Otherwise, click [No].
HP recommends that you record the
LDKC number, the CU number and the
LDEV number of the mainframe volume.
Warning:
A mainframe volume is included in the
journal volumes to be deleted.
Note that the following points if you have
made volume pairs by using this journal
before.
• The mainframe volume will be
blocked.
• The mainframe volume needs to be
formatted when you use the volume
as a non-journal volume.
• The LDKC number, the CU number
and the LDEV number of the
mainframe volumes are recommended
to be recorded.
Do you want to continue the operation?
590416610
WAll journals are used by Continuous
Access Journal Z or Continuous Access
Journal. If possible, delete the journals
for Continuous Access Journal Z or
Continuous Access Journal, then start the
Continuous Access Journal Z window or
the Continuous Access Journal window.
There are no valid journals.590426610
WReduce the number of journal volumes
to be registered, or increase the number
of journal volumes to be deleted.
The number of journal volumes in some
journals exceeds the maximum.
Adjust the number of journal volumes.
590436610
WUse the sort function to identify volumes
with the same LDKC number, the same
CU number and the same LDEV number.
The same volume is stored more than
once in the Preview list.
Please use the sort function to identify
volumes with the same LDKC number,
the same CU number and the same LDEV
number.
591006610
WCreate a volume that can be used as a
journal volume. To do this, add a volume
or use some other way.
There is no volume that can be registered
or deleted.
591036610
WSpecify another parity group.The specified parity group does not
contain volumes that can be registered
or deleted as journal volumes.
591046610
WCheck the CLPR number for the specified
data volume, and specify only one CLPR
number.
There are two or more CLPR numbers for
the specified data volume. In this
operation, please specify only one CLPR
number.
591116610
WSpecify only the volume that has the
same CLPR number as the CLPR number
of the volume in the Preview list.
The CLPR number of the specified data
volume is different from the CLPR number
of the data volume in the Preview list. In
this operation, please specify only one
CLPR number.
591126610
216 Message (part code group 6nnn)
To Next Page
Loading...
Need help?
General