HP StorageWorks P9000 - Disk Arrays User Manual

Table 59 Error codes (part code 7005) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
E
• Restore the blocked volume, then retry
the operation.
• The system disk cannot be specified
as a reserved volume. Specify another
volume.
The command has been rejected,
because the specified volume is blocked
or used as a system disk.
85587005
WWait until the volume is formatted, and
retry the operation.
The volume is being formatted.85597005
WSpecify a volume that is not used as a
command device.
This volume cannot be specified because
it is used as a command device.
85607005
EPlease contact HP Technical Support.The command code is invalid.85617005
EPlease contact HP Technical Support.The command code sender is invalid.85627005
WCheck the contents, and retry.The volume type is invalid.85637005
WCheck the contents, and retry.The volume type is invalid.85647005
EPlease contact HP Technical Support.The command code sender is invalid.85657005
EPlease contact HP Technical Support.The attribute of the reserved volume is
invalid.
85667005
EPlease contact HP Technical Support.The number of effective lists is invalid.85677005
WSpecify the volume of the supported
emulation type.
The emulation type is invalid.85687005
WSee the section "Planning number of
pairs" in the HP StorageWorks P9000
Business Copy User Guide for the
relation between the number of pairs that
can be created and the shared
memories.
The command has been rejected,
because the area of the differential table
or pair table to set pairs is insufficient.
85697005
WRefresh the window, and retry the
operation.
The selected volume does not exist.85707005
WCheck the status of the volume.The volume is already defined as a
reserved volume.
85717005
WCheck the status of the volume.The volume is already defined as a
P-VOL.
85727005
WRelease the Auto LUN setting.The volume is defined as a source
volume for Auto LUN.
85737005
WRelease the Auto LUN setting.The volume is defined as a target volume
for Auto LUN.
85747005
WCheck the status of the volume.The selected volume is not a reserved
volume.
85757005
WCheck the contents, and retry.No reserved volume is available for use.85767005
WStop the operation of the Reserve volume
setting, or delete the Reserve volume.
The number of reserved volumes to be
defined exceeds the maximum.
85777005
WCheck the contents, and retry.The P-VOL is already paired with a
backup volume. The P-VOL cannot be
paired with the target volume.
85787005
WDefine the reserve volume, then retry the
operation.
No volume is defined as a reserved
volume.
85797005
226 Message (part code group 7nnn)

HP StorageWorks P9000 - Disk Arrays Specifications

General

Brand	HP
Model	StorageWorks P9000 - Disk Arrays
Category	Storage
Language	English