Table 62 Error codes (part code 7105) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
WSee the section "Planning number of
pairs" in the Business Copy for
Mainframe Systems User Guide for the
relation between the number of pairs that
can be created and the shared
memories.
The command has been rejected,
because the area of the differential table
or pair table to set pairs is insufficient.
85697105
WRefresh the window, and retry the
operation.
The selected volume does not exist.85707105
WCheck the contents, and retry.The volume is already defined as a
reserved volume.
85717105
WCheck the contents, and retry.The volume is already defined as S-VOL.85727105
WRelease the Auto LUN setting.The volume is defined as a source
volume for Auto LUN.
85737105
WRelease the Auto LUN setting.The volume is defined as a target volume
for Auto LUN.
85747105
WCheck the status of the volume.The selected volume is not a reserved
volume.
85757105
WCheck the contents, and retry.No reserved volume is available for use.85767105
WStop the operation of the Reserve volume
setting, or delete the Reserve volume.
The number of reserved volumes to be
defined exceeds the maximum.
85777105
WCheck the contents, and retry.The S-VOL is already paired with a
backup volume. The S-VOL cannot be
paired with the target volume.
85787105
WDefine the reserve volume, then retry the
operation.
No volume is defined as a reserved
volume.
85797105
WYou cannot use the volume. Specify other
volume, and retry the operation.
The specified volume is for backup
servers only.
85807105
WCheck the contents, and retry.The specified volume is not for backup
servers only.
85817105
WWait a while, and retry the operation.The emulation type of the target volume
is being changed.
85827105
WSpecify the volume of the supported RAID
level.
The RAID level of the specified volume
is not supported.
85837105
WDefine the reserve volume, then retry the
operation.
No volume is defined as a reserved
volume.
85847105
WStop the operation of the Reserve volume
setting, or delete the Reserve volume.
The number of reserved volumes exceeds
the maximum.
85857105
WCheck the contents, and retry.The number of groups that can be set in
the same subsystem is invalid.
85867105
WCheck the contents, and retry.The number of pairs that can be set in
the same group is invalid.
85877105
WCheck the contents, and retry.The specified group number is not set.85887105
WCheck the contents, and retry.The specified group name is invalid.85897105
WCheck the contents, and retry.The group name and the number do not
match.
85907105
Part code 7105 245
To Next Page
Loading...
Need help?
General