HP StorageWorks P9000 - Disk Arrays User Manual

Table 62 Error codes (part code 7105) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
WPlease contact HP Technical Support.The specified CU number is invalid.86317105
EPlease contact HP Technical Support.The timing of issuing the command is
invalid.
86327105
EPlease contact HP Technical Support.The abnormal status is invalid.86337105
WSpecify other volume(s), or release the
Auto LUN setting.
The volume specified as a reserved
volume is already defined as a reserved
volume for Auto LUN.
86347105
WSpecify other volume(s), or release the
Auto LUN setting.
The specified S-VOL is defined as a
reserved volume for Auto LUN.
86357105
WSpecify other volume(s), or release the
Auto LUN setting.
The specified T-VOL is defined as a
reserved volume for Auto LUN.
86367105
WSpecify other volume(s), or release the
Auto LUN setting.
The specified S-VOL is used as a source
volume for Auto LUN.
86377105
WYou cannot execute the specified
operation. Release the Cache Residency
Z setting for the operation.
The command has been rejected,
because the specified S-VOL is set for
use in Cache Residency Z.
86387105
WYou cannot execute the specified
operation. Release the Cache Residency
Z setting for the operation.
The command has been rejected,
because the specified T-VOL is set for
use in Cache Residency Z.
86397105
WWait until Reverse Copy or Quick
Restore completes.
The command has been rejected,
because the pair sharing the S-VOL was
in the Reverse Copy or Quick Restore
status.
86407105
WYou cannot execute the specified
operation. Release the Reverse Copy for
the operation.
The pairs contain a pair in the Reverse
Copy status.
86417105
WThe Resynchronize Volume Pair
operation cannot be executed in the
current pair status.
See the section "Rresynchronize pairs"
in the Business Copy for Mainframe
Systems User Guide for the relation
between the state of pairs and the
Business Copy Z operations.
The Resynchronize Volume Pair
operation has been rejected, because
the specified pair is not in the state of
Split.
86437105
WCheck the pair status.The command has been rejected,
because the pair status is not Split or
Suspend.
86447105
WYou cannot execute the specified
operation. Release the Remote Copy pair
for the operation.
The Reverse Copy command has been
rejected, because the S-VOL is shared
as the M-VOL of a Remote Copy pair.
86457105
WDelete the Remote Copy pair.The Reverse Copy request was rejected,
because the S-VOL was shared with a
Remote Copy pair in the non-suspend
status.
86467105
WDelete the Remote Copy pair.The Reverse Copy command has been
rejected, because the T-VOL is shared
with an M-VOL of a Remote Copy pair.
86477105
WCheck the specified volume number.The boot device and the S-VOL do not
match in the AddPair command.
86487105
248 Message (part code group 7nnn)

HP StorageWorks P9000 - Disk Arrays Specifications

General

Brand	HP
Model	StorageWorks P9000 - Disk Arrays
Category	Storage
Language	English