Table 65 Error codes (part code 8105) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
EThe CSV file can have up to 70,000
lines.
The number of lines is invalid.50618105
ECheck the CSV file.The size of the CSV file is invalid.50628105
WInstall Configuration File Loader.Configuration File Loader is not installed.55118105
EIf this problem persists, please contact
HP Technical Support.
An error occurred during SVP
processing. If this problem persists,
please contact HP Technical Support.
55668105
WOne line can have up to 127 letters.The length of the letter string is invalid.56508105
WThe spreadsheet can have up to 70,000
lines.
The number of lines is invalid.56518105
WCheck the CSV file.The size of the CSV file is invalid.56528105
EAssociate the Thin Provisioning volume
with a pool, then retry the operation.
The Thin Provisioning volume is not
associated with a pool. Associate the
Thin Provisioning and a pool first.
56608105
EEnter the text file.The file format is invalid.57008105
ECheck the version information of the first
row.
The header is invalid.57018105
EWrite at least one tag.There is no tag.57028105
WInstall the Configuration File Loader.Configuration File Loader is not installed.57058105
WCorrect the name of CHA.The specified CHA does not exist.57108105
WCorrect the name of the port.The specified port does not exist.57118105
WCorrect the numbers for CU and LDEV
(CU: LDEV).
The numbers specified for CU and LDEV
(CU: LDEV) are invalid.
57128105
WDefine each tag once in a sheet.You set the same tag name more than
once.
57208105
WCorrect the invalid parameter.The parameter is invalid.57218105
WWrite one definition only in each tag.Duplicate definition error.57308105
WCorrect the current information.The current information is invalid.57318105
WCorrect the name of the CHA.There is a difference between the current
CHA and the specified CHA.
57408105
WCorrect the name of the port.There is a difference between the current
port and the specified port.
57418105
WThe Channel Speed value is invalid.
Specify a correct value.
The setting cannot be performed,
because an invalid Channel Speed value
is set to the specified port.
57428105
WCorrect the CU and LDEV.There is a difference between the current
CU:LDEV and the specified CU:LDEV.
57438105
WTurn on the command device switch.The command device security switch
cannot be turned on because this is not
command device.
57448105
WTurn on the security switch on this port.The security switch on the port is off. Turn
on the switch.
57458105
WCorrect the group ID.The group ID is invalid.57468105
266 Message (part code group 8nnn)
To Next Page
Loading...
Need help?
General