HPE FlexNetwork MSR Series - Displaying and Maintaining WAAS; WAAS Configuration Examples; Predefined WAAS Policy Configuration Example

468
Displaying and maintaining WAAS
Execute display commands in any view and reset commands in user view.
Task Command
Display WAAS class configuration.
display waas class
[ class-name ]
Display WAAS policy configuration.
display waas policy
[ policy-name ]
Display WAAS session information
(centralized devices in standalone
mode).
display waas session
{
ipv4
|
ipv6
} [
client-ip
client-ip ]
[
client-port
client-port ] [
server-ip
server-ip ] [
server-port
server-port ] [
peer-id
peer-id ] [
verbose
]
Display WAAS session information
(distributed devices in standalone
mode/centralized devices in IRF mode).
display waas session
{
ipv4
|
ipv6
} [
client-ip
client-ip ]
[
client-port
client-port ] [
server-ip
server-ip ] [
server-port
server-port ] [
peer-id
peer-id ] [
verbose
] [
slot
slot-number ]
Display WAAS session information
(distributed devices in IRF mode).
display waas session
{
ipv4
|
ipv6
} [
client-ip
client-ip ]
[
client-port
client-port ] [
server-ip
server-ip ] [
server-port
server-port ] [
peer-id
peer-id ] [
verbose
] [
chassis
chassis-number
slot
slot-number ]
Display DRE statistics (centralized
devices in standalone mode).
display waas statistics dre
[
peer-id
peer-id ]
Display DRE statistics (distributed
devices in standalone mode/centralized
devices in IRF mode).
display waas statistics dre
[
peer-id
peer-id ] [
slot
slot-number ]
Display DRE statistics (distributed
devices in IRF mode).
display waas statistics dre
[
peer-id
peer-id ] [
chassis
chassis-number
slot
slot-number ]
Display the global WAAS status.
display waas status
Display autodiscovered blacklist
information (centralized devices in
standalone mode).
display waas tfo auto-discovery blacklist
{
ipv4
|
ipv6
}
Display autodiscovered blacklist
information (distributed devices in
standalone mode/centralized devices in
IRF mode).
display waas tfo auto-discovery blacklist
{
ipv4
|
ipv6
} [
slot
slot-number ]
Display autodiscovered blacklist
information (distributed devices in IRF
mode).
display waas tfo auto-discovery blacklist
{
ipv4
|
ipv6
}
[
chassis
chassis-number
slot
slot-number ]
Clear the DRE data dictionary.
reset waas cache dre
[
peer-id
peer-id ]
Clear DRE statistics.
reset waas statistics dre
[
peer-id
peer-id ]
Clear all blacklist entries.
reset waas tfo auto-discovery blacklist
WAAS configuration examples
Predefined WAAS policy configuration example
Network requirements
As shown in Figure 166, apply the predefined WAAS policy on Router A and Router B.
The host downloads data from the server. Examine the optimization effect by comparing DRE
statistics for the first download and second download.