HPE FlexNetwork MSR Series Comware 7 Layer 3 - Ip Services Configuration Guides

449
Setting the ToS field to 0 for translated IPv4
packets
Step Command Remarks
1. Enter system view.
system-view
N/A
2. Set the ToS field to 0 for IPv4
packets translated from IPv6
packets.
aft turn-off tos
By default, the ToS field value of
translated IPv4 packets is the
same as the Traffic Class field
value of original IPv6 packets.
Setting the Traffic Class field to 0 for translated
IPv6 packets
Step Command Remarks
1. Enter system view.
system-view
N/A
2. Set the Traffic Class field to 0
for IPv6 packets translated
from IPv4 packets.
aft turn-off traffic-class
By default, the Traffic Class field
value of translated IPv6 packets is
the same as the ToS field value of
original IPv4 packets.
Displaying and maintaining AFT
Execute display commands in any view and reset commands in user view.
Task Command
Display AFT configuration.
display aft configuration
Display AFT address group information.
display aft address-group
[ group-id ]
Display AFT mappings (centralized devices in
standalone mode).
display aft address-mapping
Display AFT mappings (distributed devices in
standalone mode/centralized devices in IRF
mode).
display aft address-mapping
[
slot
slot-number ]
Display AFT mappings (distributed devices in
IRF mode).
display aft address-mapping
[
chassis
chassis-number
slot
slot-number ]
Display information about AFT NO-PAT entries
(centralized devices in standalone mode).
display aft no-pat
Display information about AFT NO-PAT entries
(distributed devices in standalone
mode/centralized devices in IRF mode).
display aft no-pat
[
slot
slot-number ]
Display information about AFT NO-PAT entries
(distributed devices in IRF mode).
display aft no-pat
[
chassis
chassis-number
slot
slot-number ]
Display AFT port block mappings (centralized
devices in standalone mode).
display aft port-block

HPE FlexNetwork MSR Series Specifications

General

Brand	HPE
Model	FlexNetwork MSR Series
Category	Network Router
Language	English