CAUTION:CAUTION: THE CONTACTS ARE VERY FRAGILE AND EASILY DAMAGED. THE CONTACTS ARE VERY FRAGILE AND EASILY DAMAGED. To avoid damage to the socket or processor, do
not touch the contacts.
Removing the processorRemoving the processor
PrerequisitesPrerequisites
Identify the processor and socket components .
Review the processor cautions .
Before you perform this procedure, make sure that you have the following items available:
T-20 Torx screwdriver
Alcohol wipe
ProcedureProcedure
1. Power down the server.
2. If installed, open the cable management arm.
3. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
4. Disconnect all peripheral cables from the server.
5. Remove the server from the rack .
6. Place the server on a flat, level work surface.
7. Remove the access panel.
8. Do one of the following:
To Next Page
Loading...
