HPE ProLiant DL385 Gen11 - Results; Expansion card replacement; Removing and replacing an expansion card from PCIe5 x16 base riser; Prerequisites

ResultsResults
To replace the component, reverse the removal procedure.
Expansion card replacementExpansion card replacement
SubtopicsSubtopics
Removing and replacing an expansion card from PCIe5 x16 base riserRemoving and replacing an expansion card from PCIe5 x16 base riser
Removing and replacing an expansion card from PCIe5 x16 low-profile riserRemoving and replacing an expansion card from PCIe5 x16 low-profile riser
Removing and replacing an expansion card from three-slot primary/secondary riser cagesRemoving and replacing an expansion card from three-slot primary/secondary riser cages
Removing and replacing an expansion card from the tertiary risersRemoving and replacing an expansion card from the tertiary risers
Removing and replacing the GPU from the front GPU riser cageRemoving and replacing the GPU from the front GPU riser cage
Removing and replacing an expansion card from PCIe5 x16 base riserRemoving and replacing an expansion card from PCIe5 x16 base riser
PrerequisitesPrerequisites
Before you perform this procedure, make sure that you have a T-10 Torx screwdriver available.
About this taskAbout this task
CAUTION:CAUTION:
A discharge of static electricity from a finger or other conductor might damage system boards or other static-sensitive
devices. To prevent damage, observe antistatic precautions.
CAUTION:CAUTION: To prevent improper cooling and thermal damage, do not operate the server unless all PCI slots have either a
riser slot blank or an expansion card installed.
HPE ProLiant DL385 Gen11 Server Maintenance and Service Guide 123