EasyManua.ls Logo

HPE ProLiant DL385 Gen11 - Riser slot numbering; GPU riser configuration

HPE ProLiant DL385 Gen11
373 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ItemItem DescriptionDescription DefinitionDefinition
1 PCI Express version Each PCIe version corresponds to a specific data transfer rate between
the processor and peripheral devices. Generally, a version update
corresponds to an increase in transfer rate.
PCIe 1.x
PCIe 2.x
PCIe 3.x
PCIe 4.x
PCIe 5.x
The PCIe technology is under constant development. For the latest
information, see the PCI-SIG websitePCI-SIG website.
2 Physical connector link width PCIe devices communicate through a logical connection called an
interconnect or link. At the physical level, a link is composed of one or
more lanes. The number of lanes is written with an x prefix with x16
being the largest size in common use.
x1
x2
x4
x8
x16
3 Negotiable link width These numbers correspond to the maximum link bandwidth supported by
the slot.
Riser slot numberingRiser slot numbering
CAUTION:CAUTION:
To maintain proper system cooling, do not install a 100 Gb or faster Ethernet / InfiniBand / NVME-oF adapter in Slot 6.
All riser slots are PCIe5 x16 (16, 8, 4, 1) and are rated for a maximum power draw of 75 W each.
GPU riser configurationGPU riser configuration
HPE ProLiant DL385 Gen11 Server Maintenance and Service Guide 291

Table of Contents

Related product manuals