Slot numberSlot number LocationLocation DescriptionDescription Supported form factorsSupported form factors
1 Primary riser cage Stacking riser
Full-height, half-length
Half-height, half-length (low-profile)
2 Stacking
3 Base riser
4 Secondary riser cage Stacking riser
5 Stacking riser
6 Base riser
Six-slot riser configuration with the tertiary riser cageSix-slot riser configuration with the tertiary riser cage
Slot numberSlot number LocationLocation Supported form factorsSupported form factors
7 Tertiary riser cage
Full-height, half-length
Half-height, half-length (low-profile)
8
Drive bay numberingDrive bay numbering
Drive bay numbering depends on how the drive backplanes are connected:
To a controller:
Type-o controllers install to OCP slot 21.
Type-p controllers install to a PCIe riser.
SubtopicsSubtopics
SFF drive bay numberingSFF drive bay numbering
LFF drive bay numberingLFF drive bay numbering
E3.S drive bay numberingE3.S drive bay numbering
GPU configuration drive bay numberingGPU configuration drive bay numbering
SFF drive bay numberingSFF drive bay numbering
The following drive backplane options are supported in SFF drive configurations:
Front-end: 2 SFF, side-by-side (LFF chassis only)
To Next Page
Loading...
