HPE ProLiant DL385 Gen11 - Results; Removing and replacing the optical drive from the SFF chassis; Prerequisites

14. Remove the screw (callout 1), and then remove the optical drive from the universal media bay (callout 2).
ResultsResults
To replace the component, reverse the removal procedure.
Removing and replacing the optical drive from the SFF chassisRemoving and replacing the optical drive from the SFF chassis
PrerequisitesPrerequisites
Before you perform this procedure, make sure that you have the following items available:
HPE ProLiant DL385 Gen11 Server Maintenance and Service Guide 163