Installing the system board assemblyInstalling the system board assembly
PrerequisitesPrerequisites
Before you perform this procedure, make sure that you have the following items available:
T-20 Torx screwdriver
Hex screwdriver
Thermal grease (spare part number: 777298-001)
About this taskAbout this task
CAUTION:CAUTION:
A discharge of static electricity from a finger or other conductor might damage system boards or other static-sensitive
devices. To prevent damage, observe antistatic precautions.
ProcedureProcedure
1. Install the new system board assembly:
a. Install the system board assembly in the chassis (callout 1).
b. Tighten the system board captive screw (callout 2).
To Next Page
Loading...
