HPE ProLiant DL385 Gen11 - Results; Riser board replacement; Removing and replacing the PCIe5 x16 base riser from one-slot riser cage; Prerequisites

c. Repeat steps a and b to remove the other rack rail.
ResultsResults
To replace the component, reverse the removal procedure.
Riser board replacementRiser board replacement
SubtopicsSubtopics
Removing and replacing the PCIe5 x16 base riser from one-slot riser cageRemoving and replacing the PCIe5 x16 base riser from one-slot riser cage
Removing and replacing the PCIe5 x16 low-profile riserRemoving and replacing the PCIe5 x16 low-profile riser
Removing and replacing the PCIe5 x16 base riser from three-slot riser cageRemoving and replacing the PCIe5 x16 base riser from three-slot riser cage
Removing and replacing the stacking riserRemoving and replacing the stacking riser
Removing and replacing the free-height riserRemoving and replacing the free-height riser
Removing and replacing the GPU riserRemoving and replacing the GPU riser
Removing and replacing the PCIe5 x16 base riser from one-slot riser cageRemoving and replacing the PCIe5 x16 base riser from one-slot riser cage
PrerequisitesPrerequisites
Before you perform this procedure, make sure that you have the following items available:
T-15 Torx screwdriver
T-10 Torx screwdriver
About this taskAbout this task
HPE ProLiant DL385 Gen11 Server Maintenance and Service Guide 147