HPE ProLiant DL385 Gen11 - Results; Removing and replacing a DIMM guard; Prerequisites; Procedure

ResultsResults
To replace the component, reverse the removal procedure.
Removing and replacing a DIMM guardRemoving and replacing a DIMM guard
PrerequisitesPrerequisites
Before you perform this procedure, make sure that you have a T-10 Torx screwdriver available.
ProcedureProcedure
1. Power down the server.
2. If installed, open the cable management arm.
HPE ProLiant DL385 Gen11 Server Maintenance and Service Guide 93