16. Remove the risers from the tertiary riser cage.
17. Detach the free-height riser and the stacking riser.
ResultsResults
To replace the component, reverse the removal procedure.
Removing and replacing the free-height riserRemoving and replacing the free-height riser
PrerequisitesPrerequisites
Before you perform this procedure, make sure that you have a T-15 Torx screwdriver available.
About this taskAbout this task
CAUTION:CAUTION:
A discharge of static electricity from a finger or other conductor might damage system boards or other static-sensitive
devices. To prevent damage, observe antistatic precautions.
To Next Page
Loading...
