HPE ProLiant Gen10

a. Open a browser and enter https://<iLO host name or IP address> to log on to the iLO
web interface.
b. On the login page, enter a directory or local user account name and password, and then click Log
In.
c. Select Remote Console & Media in the iLO navigation tree.
The Launch tab is displayed.
d. Verify that your system meets the requirements for using the remote console application you want
to use.
e. Click the launch button for your selected application.
You can also launch an iLO Remote Console session by selecting:
• The Integrated Remote Console link on the Information - iLO Overview page.
• The Console thumbnail in the low left corner of the iLO web interface, and then choosing the
application type to launch.
2. Restart or power on the server.
The server restarts and the POST screen appears.
3. Press F9.
The System Utilities screen appears.
Navigating the System Utilities
Procedure
1. Launch the System Utilities and do one of the following.
• To navigate the screens and modify settings, use your pointing device or press any of the
navigational keys. Key functions are shown at the bottom of every System Utilities screen.
TIP: When Setup Browser Selection is set to Auto (the default setting) or GUI, you can use
your pointing device to navigate the System Utilities screens. When Setup Browser
Selection is set to Text, you must use the navigational keys.
• To access the mobile online help, scan the QR code on the bottom left of the System Utilities
screen with your mobile device.
2. To exit the System Utilities screen and reboot the server, press Esc until the main menu is displayed,
and then select one of the following options:
• Exit and resume boot—Exits the system and continues the normal boot process. The system
continues through the boot order list and launches the first bootable option in the system.
• Reboot the System—Exits the system and reboots the system without continuing the normal boot
process.
10 Navigating the System Utilities