HPE ProLiant Gen10

◦ PCI device
◦ Firmware
3. To export the information, save your selections, and then exit the System Utilities.
Viewing System Information
Procedure
1. From the System Utilities screen, select System Information.
2. Select an option to display related information.
NOTE: You can also view firmware information using the RESTful Interface Tool. See the RESTful
Interface Tool documentation at http://www.hpe.com/info/restfulinterface/docs.
Viewing System Health
Use the System Health option to check the health status of all devices in the system. This screen shows,
for example, the presence of any unsupported devices found during the boot process.
Procedure
1. From the System Utilities screen, select System Health.
2. Select View System Health.
3. Optional: Download an AHS log. For more information, see Downloading an Active Health System
Log .
Rebooting the system, selecting a language, and setting
the browser mode
Rebooting the system
Exiting and resuming system boot
Use the Exit and resume system boot option to exit the system and continue the normal boot process.
The system continues through the boot order list and launches the first bootable option in the system. For
example, you can launch the UEFI Embedded Shell, if it is enabled and selected as first bootable option
in the UEFI Boot Order list.
Procedure
1. From the System Utilities screen, select Exit and resume system boot.
A confirmation message appears.
2. Click OK or press Enter.
42 Viewing System Information