HPE ProLiant Gen10

Action
1. Ensure that there is a DHCP server available and it is operational.
2. Try to download the file in the URL again.
Solution 3
Cause
No cable is connected to the selected NIC port.
Action
1. Ensure that there is a cable connection.
2. Try to download the URL again.
Solution 4
Cause
The file is incorrect or not present on the server, or it cannot be downloaded due to insufficient privileges.
Check the file name and that it exists on the server. Make sure that you have admin privileges on the
server.
Action
1. Ensure that the file is present, and that you are using the correct file name and have sufficient
privileges to download it.
2. Try to download the file in the URL again.
Solution 5
Cause
The HTTP or FTP server is down or did not respond.
Action
1. Ensure that the HTTP or FTP server you specified is available and that it is operational.
2. Try to download the file in the URL again.
Cannot network boot with the downloaded image file
Symptom
Booting from the image specified in the URL fails.
Solution 1
Cause
The image is not signed and Secure Boot is enabled.
Cannot network boot with the downloaded image file 135