HPE ProLiant Gen10

Procedure
1. From the System Utilities screen, select Embedded Applications > Embedded Diagnostics.
The Hardware Diagnostics screen appears.
2. Select an option.
• System Health—Lists a Health Summary (status for BIOS hardware, fans, temperature, battery,
memory, network, and storage), Fans (zone, label, status, and speed), Temperature (label, location,
status, current reading, and cautions), Power Supplies (power supply summary and smart storage
battery), Processors, Memory, NIC Information, Storage, and Firmware Information.
• System Tests—Lists information and gives you options for checking hardware subsystems to
ensure that they are working properly. The Quick Test option performs a 10-minute check of the
hardware. The Extensive Test option performs a full check of the hardware and can take two or
more hours to complete.
• Component Tests—Lists information and gives you options for checking Processor, Memory, Hard
Drive, Keyboard, Mouse, Network, Optical Drive, System Board, USB Port, and Video tests.
• Test Logs—Displays test logs, which contain information about test type and results, including
failures.
• IML Log—Displays all IML log files, which include information about the severity, class, initial time,
and update time.
• Language—Selects your language for the Embedded Diagnostics.
• Exit—Exits the Embedded Diagnostics menu and returns you to the System Utilities screen.
Launching Intelligent Provisioning
Intelligent Provisioning is an embedded, single-server deployment tool that simplifies server setup,
providing a reliable and consistent way to deploy server configurations. The Intelligent Provisioning
option lets you select the Intelligent Provisioning host override option for this boot only. It does not modify
the normal boot order or boot mode settings. For more information, see the Intelligent Provisioning user
guide on the Hewlett Packard Enterprise website (http://www.hpe.com/info/intelligentprovisioning/
docs).
Procedure
1. From the System Utilities screen, select Embedded Applications > Intelligent Provisioning.
2. To return to the System Utilities menu, reboot the server.
System Information and System Health
System Information
Use this option to view:
• Summary—Shows a summary of system settings, including:
◦ System Name
◦ Serial Number
40 Launching Intelligent Provisioning