HPE ProLiant Gen10

Setting a Local/Remote Threshold
Procedure
1. From the System Utilities screen, select System Configuration > BIOS/Platform Configuration
(RBSU) > Power and Performance Options > Local/Remote Threshold.
2. Select a setting.
• Disabled
• Low
• Medium
• High
3. Save your setting.
Setting the LLC Dead Line Allocation
Procedure
1. From the System Utilities screen, select System Configuration > BIOS/Platform Configuration
(RBSU) > Power and Performance Options > LLC Dead Line Allocation.
2. Select one of the following:
• Enable—Opportunistically fill dead lines in LLC.
• Disable—Never fill dead lines in LLC.
3. Save your setting.
Setting the Stale A to S
Procedure
1. From the System Utilities screen, select System Configuration > BIOS/Platform Configuration
(RBSU) > Power and Performance Options > Stale A to S.
2. Select one of the following:
• Enable—Enable Stale A to S directory optimization.
• Disable—Disable Stale A to S directory optimization.
3. Save your setting.
Disabling Processor Prefetcher Options
By default, Processor Prefetcher Options are enabled to provide optimal performance for most
environments. In some cases, disabling these options can improve performance.
96 Setting a Local/Remote Threshold