HPE ProLiant Gen10

Procedure
1. From the System Utilities screen, select System Configuration > BIOS/Platform Configuration
(RBSU) > Server Security > Processor AES-NI Support.
2. Select a setting.
• Enabled—Enables AES-NI support.
• Disabled—Disables AES-NI support.
3. Save your changes.
Enabling or disabling backup ROM image authentication
Use the Backup ROM Image Authentication option to enable or disable cryptographic authentication of
the backup ROM image on startup.
Procedure
1. From the System Utilities screen, select System Configuration > BIOS/Platform Configuration
(RBSU) > Server Security > Backup ROM Image Authentication.
2. Select a setting.
• Enabled—The backup ROM image is authenticated on startup.
• Disabled—The backup ROM image is not authenticated on startup. Only the primary image is
authenticated.
3. Save your changes.
PCIe device options
Selecting advanced PCIe device settings
Procedure
1. From the System Utilities screen, select System Configuration > BIOS/Platform Configuration
(RBSU) > PCIe Device Configuration > Advanced PCIe Configuration.
2. Select settings.
• NVMe PCIe Resource Padding—Configures PCIe resources to support PCIe hot-add for NVMe
drives.
Enabling or disabling backup ROM image authentication 119