Action
1. Ensure that the image is signed and that its Secure Boot settings are correct.
2. Try to download the file in the URL again.
Solution 2
Cause
The downloaded file is corrupt.
Action
1. Select a new file.
2. Repeat the URL configuration, specifying the new file.
3. Try to download the new file in the URL.
Cannot deploy from the UEFI Shell script
Symptom
You attempted to deploy an OS using the UEFI Shell script and you see an error message that the
deployment failed.
Cause
Configuration settings are not correct.
Action
1. Verify the following.
a. The Embedded UEFI Shell interface is added to the UEFI Boot Order list or the One-Time Boot
Menu.
b. When added to the UEFI Boot Order list, the Embedded UEFI Shell interface is the first boot
option in the UEFI Boot Order list so that it overrides other boot options to load.
c. UEFI Shell Script Auto-Start is enabled.
d. The correct startup.nsh script file location in attached media or a network location is specified. If
it is in attached media, the startup.nshscript must be either inside the fsX:\ or the fsX:\efi
\boot\ directory.
e. The .nsh script only contains supported commands.
f. Your system has enough RAM memory to create RAM disks during automated script execution.
g. Any OS boot loader or diagnostics application launched using the .nsh script is supported to
run in UEFI the environment.
h. If the shell script verification is enabled, ensure the script is enrolled in the Secure Boot database
and that the script starts with the line #!NSH.
2. Try the deployment again.
136 Cannot deploy from the UEFI Shell script
To Next Page
Loading...
