HPE ProLiant Gen10

Procedure
1. From the System Utilities screen, select System Configuration > BIOS/Platform Configuration
(RBSU) > Advanced Options > Mixed Power Supply Reporting.
2. Select a setting.
• Enabled
• Disabled
3. Save your setting.
Enabling or disabling High Precision Event Timer (HPET) ACPI Support
Use the High Precision Event Timer (HPET) ACPI Support option to enable or disable the High
Precision Event Timer (HPET) table and device object in ACPI.
Procedure
1. From the System Utilities screen, select System Configuration > BIOS/Platform Configuration
(RBSU) > Advanced Options > High Precision Event Timer (HPET) ACPI Support.
2. Select a setting.
• Enabled—The HPET is available to an operating system that supports it using the industry
standard ACPI name space.
• Disabled—The HPET is not available to an operating system that supports it using the industry
standard ACPI name space.
3. Save your setting.
Setting the thermal configuration
Use the Thermal Configuration option to select the fan cooling method for the system. Modifying this
option is only advised for configurations that differ from typical Hewlett Packard Enterprise-supported
configurations that cannot be cooled adequately via Optimal Cooling.
Procedure
1. From the System Utilities screen, select System Configuration > BIOS/Platform Configuration
(RBSU) > Advanced Options > Fan and Thermal Options > Thermal Configuration.
2. Select a setting.
• Optimal Cooling—Provides the most efficient solution by configuring fan speeds to the minimum
required to provide adequate cooling.
• Increased Cooling—Operates fans at a higher speed.
Enabling or disabling High Precision Event Timer (HPET) ACPI Support 123