HPE ProLiant Gen10

Rebooting the system
Use the Reboot the System option to exit the system and reboot without continuing with the normal boot
process.
Procedure
1. From the System Utilities screen, select Reboot the System.
A confirmation message appears.
2. Click Yes, Reboot, or press Enter.
Selecting a language and browser mode
Selecting a system language
Procedure
1. From the System Utilities screen, select Select Language.
2. Select a language.
• English
• Japanese
• Simplified Chinese
3. Save your setting.
Selecting a browser mode
Procedure
1. From the System Utilities screen, select Setup Browser Selection.
2. Select a setting.
• GUI—Opens a GUI-based browser when you access the System Utilities using the Integrated
Remote Console or a physical terminal.
• Text—Opens a text-based browser when you access the System Utilities using a serial console.
• Auto—Depending on how you access the System Utilities, opens either a text-based browser, or a
GUI-based browser.
3. Save the setting.
More information
Navigating the System Utilities in GUI mode on page 11
Rebooting the system 43