• Use Current ROM
• Switch to Backup ROM—Reverts to the image in use before the last flash event.
3. Save your setting.
Configuring an embedded video connection
Procedure
1. From the System Utilities screen, select System Configuration > BIOS/Platform Configuration
(RBSU) > Advanced Options > Embedded Video Connection.
2. Select a setting.
• Auto—The external video connection to the embedded video controller is automatically disabled to
save power when a monitor is not attached. It is enabled automatically when a monitor is attached
(including when the server is operating).
• Always Disabled—The external video connection to the embedded video controller is disabled,
and a monitor connected to this port does not display except during system boot.
• Always Enabled—The external video connection to the embedded video controller is always
enabled. This option is only required if a monitor is attached with a monitor detection that does not
function, causing Auto mode to not work properly.
3. Save your setting.
Enabling or disabling Consistent Device Naming
On supported operating systems, use the Consistent Device Naming option to control how NIC ports
are named based on their locations in the system.
NOTE: Existing NIC connections retain their names until reinstalled under the OS environment.
Procedure
1. From the System Utilities screen, select System Configuration > BIOS/Platform Configuration
(RBSU) > Advanced Options > Consistent Device Naming.
2. Select a setting.
• CDN Support for LOMs and Slots—Names all NIC ports on the system.
• CDN Support for LOMs Only—Names Embedded NICs and FlexibleLOMs, but no other NIC
ports.
• Disabled—Disables consistent device naming.
3. Save your setting.
Enabling or disabling mixed power supply reporting
Use the Mixed Power Supply Reporting option to set whether the server logs messages when a mixed
supply configuration is present.
122 Configuring an embedded video connection
To Next Page
Loading...
