The new boot option is appended to the UEFI Boot Order list. When you select a file, you are prompted to
enter the boot option description (which is then displayed in the boot menu), as well as any optional data
to be passed to an .EFI application.
Procedure
1. Attach media with a FAT16 or FAT32 partition on it.
2. From the System Utilities screen, select System Configuration > BIOS/Platform Configuration
(RBSU) > Boot Options > UEFI Boot Settings > Add Boot Option.
3. Browse for an .EFI application from the list, and then press Enter.
4. If necessary, continue to press Enter to drill-down through the menu options.
5. Enter a boot option description and optional data, and then press Enter.
The new boot option appears in the UEFI Boot Order list.
6. Select Commit changes and exit.
Deleting boot options from the UEFI Boot Order list
NOTE: If a deleted option points to a standard boot location, such as a network PXE boot or a removable
media device, the system BIOS adds the option on the next reboot.
Procedure
1. From the System Utilities screen, select System Configuration > BIOS/Platform Configuration
(RBSU) > Boot Options > UEFI Boot Settings > Delete Boot Option.
2. Select one or more options from the list.
3. Select Commit Changes and Exit.
Changing the Legacy BIOS Boot Order list
Prerequisite
Boot Mode is set to Legacy BIOS Mode.
Procedure
1. From the System Utilities screen, select System Configuration > BIOS/Platform Configuration
(RBSU) > Boot Options > Legacy BIOS Boot Order.
2. To navigate within the boot order list, use your pointing device or the arrow keys.
3. Select an entry and change its order in the list:
• To move an entry higher in the boot list, press the + key, or drag and drop the entry.
• To move an entry lower in the boot list, press the - key, or drag and drop the entry.
4. Save your changes.
Deleting boot options from the UEFI Boot Order list 79
To Next Page
Loading...
