HPE ProLiant Gen10

Navigating the System Utilities in GUI mode
System Utilities GUI that allows you to navigate using either your pointing device or navigational keys. In
GUI mode, selected menu items turn green.
NOTE: GUI mode is not supported when you access the System Utilities using a serial console.
To set the browser mode to GUI:
Prerequisites
• The System Utilities is accessed through Integrated Remote Console or a physical terminal.
• Setup Browser Selection is set to Auto or GUI.
Procedure
1. From the System Utilities screen, select Setup Browser Selection.
2. Select Auto or GUI.
3. Save the setting.
4. Reboot the system.
UEFI System Utilities GUI
HPE ProLiant Gen10 and HPE Synergy compute modules support a GUI UEFI System Utilities. Both
mouse and keyboard devices are supported on the UEFI System Utilities GUI.
Regions
The System Utilities GUI has the following regions:
1. Caption Bar—This region shows the UEFI form title and the system buttons. The Form title shows the
name of the form that you are currently navigating.
2. Navigation History—This region shows the forms to which you navigated previously. A Navigation
History node is added to the navigation history each time you visit a new system utility form.
3. Server Information—This region shows server information and function key information.
4. System Utilities Form—This region shows the menu options of the current form.
5. Activity Bar—This region shows the system wide functions, such as function keys and the system
status indicator.
Keyboard support in the GUI
The GUI has support for basic keys to navigate the system utilities form. The Tab key is used to change
the focus on the different regions of the form. Supported keys include:
• Up and Down arrows
• Enter
• Function keys
• Esc key
Navigating the System Utilities in GUI mode 11