HPE ProLiant Gen10

NOTE: Available with select HPE ProLiant Gen10 servers, Intel processors, and hardware
configurations. Requires an iLO Advanced Premium Security Edition license.
3. Save your changes.
Setting Direct to UPI Options
Procedure
1. From the System Utilities screen, select System Configuration > BIOS/Platform Configuration
(RBSU) > Power and Performance Options > Advanced Performance Tuning Options > Direct to
UPI.
2. Select an option.
• Enabled—Provides a performance benefit in multiprocessor configured systems that rely on the
UPI bus for remote memory or I/O accesses.
• Disabled
3. Save your changes.
Intelligent System Tuning
HPE Intelligent System Tuning for HPE Gen10 servers consists of the following features:
• Workload Matching—Use preconfigured server profiles to maximize application performance.
• Jitter Smoothing—Use the Processor Jitter Control setting to level and balance frequency
fluctuation (jitter) resulting in lower latency.
• Core Boosting—Where supported, use to produce higher performance across more active cores.
NOTE: Core boosting is available only on select HPE servers with select Intel processors.
Table 5: Intelligent System Tuning Prerequisites
Requirements Workload
Matching
Jitter Smoothing Core Boosting
HPE Gen10 server
1
Intel processor
2
iLO 5
iLO Advanced license or iLO Advanced
Premium Security Edition license
Table Continued
Setting Direct to UPI Options 99