HPE ProLiant Gen10

• Select an attached media device where you want to export the file, and then continue selecting the
menu path for the certificate file. Press Enter after each selection.
• To export to a new file, press +, and then enter a file name.
Exporting all TLS certificates
Procedure
1. From the System Utilities screen, select System Configuration > BIOS/Platform Configuration
(RBSU) > Server Security > TLS (HTTPS) Options > Export all Certificates.
A File Explorer screen shows attached media devices.
2. Do one of the following:
• Select an attached media device where you want to export the files, and then continue selecting
the menu path for the certificate file. Press Enter after each selection.
• To export to a new file, press +, and then enter a file name.
Resetting all TLS settings to platform defaults
Procedure
1. From the System Utilities screen, select System Configuration > BIOS/Platform Configuration
(RBSU) > Server Security > TLS (HTTPS) Options > Reset all settings to platform defaults.
2. Click OK.
Configuring advanced TLS security settings
Procedure
1. From the System Utilities screen, select System Configuration > BIOS/Platform Configuration
(RBSU) > Server Security > TLS (HTTPS) Options > Advanced Security Settings.
2. Configure options.
• To configure which cipher suites are allowed for TLS connections:
a. Select Cipher suites allowed for TLS connections.
b. Select one of the following:
◦ Individual check boxes for the cipher suites you want to allow.
◦ Select Platform Default Cipher suites
c. Select Commit changes and exit.
• To configure the certificate validation process for every TLS connection:
114 Exporting all TLS certificates