HPE ProLiant Gen10

• HTTP Support policy is enabled, and the URL provided by the DHCP server matches the HTTP
Support policy setting.
• Shell Auto-Start Script Location is set to Network Location or Auto.
• The DHCP server is configured to provide HTTP/HTTPS or FTP URLs.
• The DHCP server is configured to respond to the User Class option set to UEFIShell. When using
DHCP over IPv4, the User Class option is Option 77, and Option 15 when using DHCP over IPv6.
Procedure
1. From the System Utilities screen, select System Configuration > BIOS/Platform Configuration
(RBSU) > Embedded UEFI Shell > Discover Shell Auto-Start using DHCP.
2. Select a setting.
• Enabled—The Shell uses DHCP to discover the startup script URL.
• Disabled—The Shell does not send DHCP requests to discover the startup script URL.
3. Save your setting.
Setting the network location for the Shell auto-start script
Prerequisites
• Embedded UEFI Shell is enabled.
• Shell Auto-Start Script Location is set to Network Location or Auto.
• Discover Shell Auto-Start Script using DHCP is disabled.
• When specifying and HTTPS URL, the TLS certificate of the HTTPS server is configured using Server
Security > TLS (HTTPS) Options.
Procedure
1. From the System Utilities screen, select System Configuration > BIOS/Platform Configuration
(RBSU) > Embedded UEFI Shell > Network Location for Shell Script-Auto Start.
2. Enter the network location of the .nsh file. Valid values are:
• An HTTP/HTTPS URL for either an IPv4 or IPv6 server address or host name.
• An FTP URL for either an IPv4 or IPv6 server address or host name.
Examples:
◦ http://192.168.0.1/file/file.nsh
◦ http://example.com/file/file.nsh
Setting the network location for the Shell auto-start script 105