HPE ProLiant Gen10

• High Efficiency Mode (Odd Supply Standby)—The system places the odd power supply in
standby.
• High Efficiency Mode (Even Supply Standby)—The system places the even power supply in
standby.
3. Save your setting.
Embedded UEFI Shell options
Enabling or disabling the Embedded UEFI Shell
Use the Embedded UEFI Shell option to enable or disable the pre-boot command-line environment for
scripting and running UEFI applications, including UEFI boot loaders. The Embedded UEFI Shell also
provides CLI-based commands you can use to obtain system information, and to configure and update
the system BIOS. When enabled, and Add Embedded UEFI Shell to Boot Order is enabled, the
Embedded UEFI Shell is added to the UEFI Boot Order list.
Procedure
1. From the System Utilities screen, select System Configuration > BIOS/Platform Configuration
(RBSU) > Embedded UEFI Shell > Embedded UEFI Shell.
2. Select a setting.
• Enabled—Enables you to launch the Embedded UEFI Shell from the pre-boot environment and
add it to the UEFI Boot Order list.
• Disabled—The Embedded UEFI Shell is not available in the pre-boot environment and you
cannot add it to the UEFI Boot Order list.
3. Save your setting.
Adding the Embedded UEFI Shell to the UEFI Boot Order list
Prerequisite
Boot Mode is set to UEFI Mode.
Procedure
1. From the System Utilities screen, select System Configuration > BIOS/Platform Configuration
(RBSU) > Embedded UEFI Shell > Add Embedded UEFI Shell to Boot Order.
2. Select a setting.
• Enabled—Adds the embedded UEFI Shell to the boot order list on the next reboot.
• Disabled—The embedded UEFI Shell is not added to the boot order list.
3. Save your setting.
102 Embedded UEFI Shell options