HPE ProLiant Gen10

• Administrator E-mail Address—Enter the server administrator’s e-mail address.
• Administrator Other Information—Enter additional text relating to the server administrator.
3. Save your settings.
Entering service contact information
Use the Service Contact Information option to enter service contact information for the server
administrator. The number of characters allowed for each entry varies by server model. By default, all
values are blank.
Procedure
1. From the System Utilities screen, select System Configuration > BIOS/Platform Configuration
(RBSU) > System Options > Server Asset Information > Service Contact Information.
2. Select and complete entries.
• Service Contact Name—Enter the service contact’s name.
• Service Phone Number—Enter the service contact’s phone number.
• Service Contact E-mail Address—Enter the service contact’s e-mail address.
• Service Contact Other Information—Enter additional text relating to the service contact.
3. Save your settings.
Entering a custom POST message
Use the Custom POST Message option to display a custom message on the server POST screen.
Procedure
1. From the System Utilities screen, select System Configuration > BIOS/Platform Configuration
(RBSU) > System Options > Server Asset Information > Custom POST Message.
2. Enter a message of up to 62 characters.
3. Save your setting.
Processor options
Enabling or disabling Intel Hyperthreading
Use the Intel (R) Hyperthreading Options option to disable or enable the logical processor cores on
processors supporting Intel Hyperthreading technology. Intel Hyperthreading improves overall
performance for applications that benefit from a higher processor core count.
NOTE: Hyperthreading is not supported on all processors. For more information, see the documentation
for your processor model.
62 Entering service contact information