HPE ProLiant Gen10

Procedure
1. From the System Utilities screen, select System Configuration > BIOS/Platform Configuration
(RBSU) > Server Security > Intel (R) TXT Support.
2. Select a setting.
• Enabled—Enables TXT support
• Disabled—Disables TXT support.
3. Save your changes.
Enabling or disabling the One-Time Boot Menu F11 prompt
Use this option to control whether you can press the F11 key to boot directly to the One-Time Boot Menu
during the current boot. This option does not modify the normal boot order settings. When this option is
enabled, you can boot directly into the One-Time Boot Menu in the System Utilities by pressing F11 in the
POST screen after a server reboot.
Procedure
1. From the System Utilities screen, select System Configuration > BIOS/Platform Configuration
(RBSU) > Server Security > One-Time Boot Menu (F11 Prompt).
2. Select a setting.
• Enabled
• Disabled
3. Save your changes.
Enabling or disabling the Intelligent Provisioning F10 prompt
Use the Intelligent Provisioning (F10 Prompt) option to control whether you can press the F10 key to
access Intelligent Provisioning from the POST screen.
Procedure
1. From the System Utilities screen, select System Configuration > BIOS/Platform Configuration
(RBSU) > Server Security > Intelligent Provisioning (F10 Prompt).
2. Select a setting.
• Enabled
• Disabled
3. Save your setting.
Enabling or disabling processor AES-NI support
Use the Processor AES-NI option to enable or disable the Advanced Encryption Standard Instruction Set
in the processor.
118 Enabling or disabling the One-Time Boot Menu F11 prompt