HPE ProLiant Gen10

Smart Array controllers are not functioning properly
Cause
Other Smart Array controllers are not supported and will not function properly.
For more information on supported options, see the server QuickSpecs on the Hewlett Packard
Enterprise website (http://www.hpe.com/info/qs).
For more information on the latest firmware and driver versions, see the Hewlett Packard Enterprise
website (https://www.hpe.com/support/hpesc).
Action
Hewlett Packard Enterprise recommends that Smart Array controllers be updated to the latest version of
firmware before they are used in the server. Before installing the operating system, use the latest Service
Pack for ProLiant in Offline mode to upgrade the firmware to the latest version.
VMware not booting in UEFI mode
Cause
UEFI Optimized Boot is not enabled.
140 Smart Array controllers are not functioning properly