HPE ProLiant Gen10

• 2133 MHz
• 1867 MHz
3. Save your setting.
Enabling or disabling Memory Patrol Scrubbing
When enabled, Memory Patrol Scrubbing corrects memory soft errors so that, over the length of the
system runtime, the risk of producing multibit and uncorrectable errors is reduced.
Prerequisites
Workload Profile is set to Custom.
Procedure
1. From the System Utilities screen, select System Configuration > BIOS/Platform Configuration
(RBSU) > Memory Options > Memory Patrol Scrubbing.
2. Select a setting.
• Enabled
• Disabled
3. Save your setting.
Enabling or disabling node interleaving
Use the Node Interleaving option to enable or disable NUMA node interleaving. Typically, you can obtain
optimum performance on NUMA nodes by leaving this option disabled. When this option is enabled,
memory addresses are interleaved across the memory installed for each processor and some workloads
might experience improved performance.
Procedure
1. From the System Utilities screen, select System Configuration > BIOS/Platform Configuration
(RBSU) > Memory Options > Node Interleaving.
2. Select a setting.
• Enabled—Memory addresses are interleaved across the memory installed for each processor. All
nodes must be of equal memory size. System performance might be impacted.
• Disabled—Disables node interleaving, providing optimum performance in most environments.
3. Save your setting.
Configuring AMD Secure Memory Encryption
Enabling this feature allows you to use the AMD Secure Memory Encryption functionality.
NOTE: This option is available on servers with AMD processors.
68 Enabling or disabling Memory Patrol Scrubbing