HPE ProLiant Gen10

NOTE: Only drives that meet the criteria listed in the prerequisites are displayed.
Deleting a spare drive
Procedure
1. From the System Utilities screen, select System Configuration > controller > Array
Configuration > Manage Arrays > array > Manage Spare Drives > Delete Spare Drives.
2. From the Delete Spare Drives screen, select the spare that you want to delete, and click Delete Spare
Drives.
Identifying a device
Use the UEFI System Utilities to identify a drive by turning on its device identification LED.
Procedure
1. From the System Utilities screen, select System Configuration > controller > Array
Configuration > Manage Arrays > array > Identify Device.
2. In the Identify Device screen, specify the duration (in seconds) that you want the LED to be on, select
the drive configuration type, and click On.
To turn off the LED, click Off.
Deleting an array
This procedure deletes:
• All the logical drives on the array.
• All data on the logical drives that are part of the array.
If the deleted array is the only one on the controller, the controller settings are erased, and the default
configuration is restored.
To delete an individual logical drive, see "Deleting a logical drive."
Procedure
1. From the System Utilities screen, select System Configuration > controller > Array
Configuration > Manage Arrays > array > Delete Array.
2. In the Delete Array screen, click Submit Changes.
Editing a logical drive
Procedure
1. From the System Utilities screen, select System Configuration > controller > Array
Configuration > Manage Arrays > array > List Logical Drives > logical drive > Edit Logical Drive.
2. In the Edit Logical Drive screen, edit any of the following settings.
System Utilities main menu options 33