HPE ProLiant Gen10

• Enabled—Enables the logical processor cores on processors supporting Hyperthreading
technology.
• Disabled—Reduces power usage, and also reduces the system’s maximum achievable
performance under some workloads.
3. Save your setting.
Configuring AMD Core Performance Boost
AMD Core Performance Boost controls whether the processor transitions to a higher frequency than the
processor's rated speed if the processor has available power and is within temperature specifications.
NOTE: This option is available on servers with AMD processors.
Procedure
1. From the System Utilities screen, select System Configuration > BIOS/Platform Configuration
(RBSU) > Power and Performance Options > AMD Core Performance Boost.
2. Select a setting.
• Enabled
• Disabled
3. Save your setting.
Setting the Energy/Performance Bias
Use the Energy/Performance Bias option to configure several processor subsystems to optimize the
processor’s performance and power usage.
Prerequisites
Workload Profile is set to Custom.
Procedure
1. From the System Utilities screen, select System Configuration > BIOS/Platform Configuration
(RBSU) > Power and Performance Options > Energy/Performance Bias.
2. Select a setting.
• Maximum Performance—Provides the highest performance and lowest latency. Use this setting
for environments that are not sensitive to power consumption.
• Balanced Performance—Provides optimum power efficiency and is recommended for most
environments.
92 Configuring AMD Core Performance Boost