Figure 5-72 Cable connections
No. Description BOM Number
1 SAS HD cable (Port B-Port B) for connecting the
hard disk backplane to the RAID controller card
04051115
2 SAS HD cable (Port A-Port A) for connecting the
hard disk backplane to the RAID controller card
04051114
3 SAS HD cable (Port A-Port A) for connecting the
hard disk backplane to the RAID controller card
04051114
4 SAS HD cable (Port B-Port B) for connecting the
hard disk backplane to the RAID controller card
04051115
If cables are not routed as Figure 5-71 or Figure 5-72, the server reports alarm
1B01FFFF. The alarm is cleared when the cables are connected correctly.
Prerequisites
Conditions
RH8100 V3 Server
User Guide 5 Removing and Installing Parts of the RH8100 V3
Issue 30 (2019-12-19) Copyright © Huawei Technologies Co., Ltd. 190
To Next Page
Loading...
