343
INTELLIGENT ACTUATOR
Appendix
(Note 1) The figure in each elongated circle indicates the maximum speed for the applicable stroke(s).
(Note 2) The load capacity is based on operation at the rated acceleration.
(Note 3) RCS-RB75 series actuators cannot be used as axis 5 or 6.
Model
Stroke (mm) and maximum speed (mm/sec) (Note 1)
Load capacity (Note 2) Rated acceleration
Horizontal Vertical Horizontal Vertical
RCS (Slider type)
RCS (Rod type)
RCS (Flat type)
To Next Page
Loading...
