341
INTELLIGENT ACTUATOR
Appendix
Appendix
Actuator Specification List
(Note 1) The figure in each elongated circle indicates the maximum speed for the applicable stroke(s).
(Note 2) The load capacity is based on operation at the rated acceleration.
(Note 3) RCS2-R**7 series actuators cannot be used as axis 5 or 6.
Stroke (mm) and maximum speed (mm/sec) (Note 1)
Load capacity
Horizontal
Model
Vertical
Rated acceleration
Horizontal
Vertical
RCS2 (Slider type) RCS2 (Rod type) RCS2 (Arm/flat type)
To Next Page
Loading...
