410
INTELLIGENT ACTUATOR
Appendix
I/O Parameters
No. Parameter name
Default value
(Reference)
Input
range
Unit Remarks
144 IAI protocol B/TCP: Own
port number (MANU
mode)
64511
1025 to
65535
145 Channel 31 opened to
user (TCP/IP): Own port
number
64512
1025 to
65535
146 Channel 32 opened to
user (TCP/IP): Own port
number
64513
1025 to
65535
147 Channel 33 opened to
user (TCP/IP): Own port
number
64514
1025 to
65535
148 Channel 34 opened to
user (TCP/IP): Own port
number
64515
1025 to
65535
* Important note: Always set a unique number for each port
number.
(Duplication of port numbers is permitted only in the IAI
protocol B/TCP MANU/AUTO modes.)
149 IAI protocol B/TCP: IP
address of connection
destination (MANU
mode) (H)
192 0 to 255
* Setting of “0” and “127” is prohibited.
150 IAI protocol B/TCP: IP
address of connection
destination (MANU
mode) (MH)
168 0 to 255
151 IAI protocol B/TCP: IP
address of connection
destination (MANU
mode) (ML)
0 0 to 255
152 IAI protocol B/TCP: IP
address of connection
destination (MANU
mode) (L)
100 0 to 254
* Setting of “0” and “255” is prohibited.
153 IAI protocol B/TCP: Port
number of connection
destination (MANU
mode)
64611 0 to 65535
* “0” can be set in the case of a server.
0 = Port number of connection destination is ignored (only
the IP address is checked)
* “0” cannot be set in the case of a client.
154 IAI protocol B/TCP: IP
address of connection
destination (AUTO
mode) (H)
192 0 to 255
* Setting of “0” and “127” is prohibited.
155 IAI protocol B/TCP: IP
address of connection
destination (AUTO
mode) (MH)
168 0 to 255
156 IAI protocol B/TCP: IP
address of connection
destination (AUTO
mode) (ML)
0 0 to 255
157 IAI protocol B/TCP: IP
address of connection
destination (AUTO
mode) (L)
100 0 to 254
* Setting of “0” and “255” is prohibited.
158 IAI protocol B/TCP: Port
number of connection
destination (AUTO
mode)
64611 0 to 65535
* “0” can be set in the case of a server.
0 = Port number of connection destination is ignored (only
the IP address is checked)
* “0” cannot be set in the case of a client.
159 IAI protocol B/TCP: Own
port number (AUTO
mode)
64516 1025 to
65535
* Important note: Always set a unique number for each port
number.
(Duplication of port numbers is permitted only in the IAI
protocol B/TCP MANU/AUTO modes.)
160
to
169
(For network expansion) 0
170
to
200
(For expansion) 0
To Next Page
Loading...
