232 Implementing the IBM Storwize V5000 Gen2 with IBM Spectrum Virtualize V8.1
4. The virtual WWPNs can be listed using the lstargetportfc command, as shown in
Example 5-8.
Example 5-8 Listing the virtual WWPNs
IBM_2145:ITSO:superuser>lstargetportfc
id WWPN WWNN port_id owning_node_id current_node_id nportid host_io_permitted
virtualized
1 50050768021000EF 50050768020000EF 1 1 1 010200 no no
2 50050768029900EF 50050768020000EF 1 1 1 010201 yes yes
3 50050768022000EF 50050768020000EF 2 1 1 020200 no no
4 5005076802A900EF 50050768020000EF 2 1 1 020201 yes yes
5 50050768023000EF 50050768020000EF 3 1 1 0A83C0 no no
6 5005076802B900EF 50050768020000EF 3 1 1 0A83C1 yes yes
7 50050768024000EF 50050768020000EF 4 1 1 011400 no no
8 5005076802C900EF 50050768020000EF 4 1 1 011401 yes yes
33 50050768021000F0 50050768020000F0 1 2 2 010300 no no
34 50050768029900F0 50050768020000F0 1 2 2 010301 yes yes
35 50050768022000F0 50050768020000F0 2 2 2 020300 no no
36 5005076802A900F0 50050768020000F0 2 2 2 020301 yes yes
37 50050768023000F0 50050768020000F0 3 2 2 011500 no no
38 5005076802B900F0 50050768020000F0 3 2 2 011501 yes yes
39 50050768024000F0 50050768020000F0 4 2 2 0A82C0 no no
40 5005076802C900F0 50050768020000F0 4 2 2 0A82C1 yes yes
5. At this point you can configure zones for hosts using the primary host attach ports (virtual
WWPNs) of the IBM Spectrum Virtualize ports, as shown in bold in the output of
Example 5-8.
6. If the status of fctargetportmode is disabled, run the chiogrp command to get into
transitional mode for NPIV, as shown in Example 5-9.
Example 5-9 Change the NPIV mode to transitional
IBM_2145:ITSO:superuser>chiogrp -fctargetportmode transitional 0
7. The transitional mode can be verified using the lsiogrp command, as shown in
Example 5-10.
Example 5-10 NPIV transitional mode
IBM_2145:ITSO:superuser>lsiogrp 0
id 0
name io_grp0
node_count 2
vdisk_count 2
host_count 2
flash_copy_total_memory 20.0MB
flash_copy_free_memory 20.0MB
remote_copy_total_memory 20.0MB
remote_copy_free_memory 20.0MB
mirroring_total_memory 20.0MB
mirroring_free_memory 20.0MB
raid_total_memory 40.0MB
raid_free_memory 38.8MB
maintenance no
compression_active yes
accessible_vdisk_count 2
compression_supported yes
max_enclosures 10
To Next Page
Loading...
Need help?
General